• $2M Liability Insurance$2M Insured
  • WSIB ClearanceWSIB Cleared
  • 5-Year Workmanship Warranty5-Yr Warranty
  • 20+ Years Experience
  • Home Depot Pro
  • Fully Insured
Pressure-treated board-on-board privacy fence with 6x6 posts along a backyard garden in North Richvale, Richmond Hill, built by Jacko Contracting.

Privacy Fence & Retaining Wall in North Richvale, Richmond Hill

Pressure-Treated Fence and Low Retaining Wall for Raffi in North Richvale

Raffi’s backyard in North Richvale, Richmond Hill sits on a slope, and over the years soil had been creeping under the old fence line between his yard and his neighbour’s. Jacko Contracting replaced it with a pressure-treated board-on-board privacy fence on 6×6 posts, stepped the panels to follow the grade and built a low pressure-treated timber retaining wall along the base so each yard’s soil stays on its own side. A new gate with a header beam finishes the side yard. The project was completed in July 2026.

Here is how we built a fence that gives privacy and holds the grade at the same time.

✓ 5-Year Workmanship Warranty✓ $2M Liability Insurance✓ WSIB Covered✓ 20+ Years Experience

Project at a Glance

  • Location: North Richvale, Richmond Hill
  • Client: Raffi
  • Project Type: Privacy fence and low retaining wall between neighbouring yards
  • Fence: Pressure-treated board-on-board with top cap and trim
  • Posts: 6×6 pressure-treated posts
  • Retaining: Low pressure-treated timber wall along the fence base
  • Extras: Stepped panels on the slope, side-yard gate with header beam
  • Completed: July 2026

Heavy 6×6 pressure-treated posts carry a tall, solid privacy fence on a sloped lot.

A low timber retaining wall along the base keeps soil from moving between the two yards.

Stepped panels follow the grade so the top line stays clean and level in each section.

A side-yard gate with a header beam ties the new fence into the house.

Why this fence had to hold back soil, not just give privacy

The yards on either side of Raffi’s property line sit at different heights. With the old fence, nothing held the higher ground in place, so soil and mulch were slowly washing under the boards into the neighbouring yard. A standard fence alone would have looked new but left the same problem.

The answer was to build the fence and a low retaining wall as one system: sturdy 6×6 posts set to carry both the fence and the soil load, with pressure-treated timber boards along the base to hold the grade where it belongs.

How the North Richvale fence came together

Fence and retaining work on a slope is all about layout and posts. Here is how we built it.

First, layout and the property line

We confirmed the fence line with Raffi and his neighbour, removed the old fence and checked the grade along the full run so we knew where the panels would need to step and where soil had to be held back.

Then, setting the 6×6 posts

We set 6×6 pressure-treated posts along the line. The heavier posts give the tall privacy fence and the retaining boards a solid, straight backbone that resists wind and soil pressure.

Next, the low retaining wall

Along the base we fastened ground-contact pressure-treated timber boards between the posts to form a low retaining wall, then backfilled and regraded so each yard sits neatly on its own side.

Finally, the fence and gate

We built the board-on-board panels with a top cap and trim, stepping them down the slope, and added a side-yard gate with a header beam beside the house. See our fence installation service.

What Raffi’s yard looks like now

The new fence gives Raffi a tall, solid wall of privacy along his garden, with clean stepped lines that follow the slope instead of fighting it. At the base, the timber retaining boards hold the soil in place, so neither yard spills into the other. With 6×6 posts and pressure-treated lumber throughout, the fence is built to stay straight and strong for years.

FAQs About Fences and Retaining Walls in Richmond Hill

Do I need a permit for a low retaining wall in Richmond Hill?

Usually not for a low landscape wall. Under the Ontario Building Code, retaining walls over 1 metre high next to public property, a building access or other areas the public uses are designated structures that need an engineered design and a building permit. Low walls like this one generally fall below that, but we confirm the height and location rules before we build.

Why use 6×6 posts instead of 4×4 posts for a fence?

A 6×6 post has more than twice the cross-section of a 4×4, so it resists bending from wind on a tall solid privacy fence and is less likely to twist or lean over time. It also gives a sturdier base when the bottom of the fence is holding back soil, as it was on this project.

How do you build a fence on a sloped yard?

There are two common options: stepping the panels so each section stays level and drops in steps down the slope, or racking the panels to follow the grade. We stepped the panels on this Richmond Hill project and closed the gaps under the fence with retaining boards so soil stays on each side.

Who pays for a fence between two neighbours in Richmond Hill?

In Ontario, neighbours often agree to share the cost of a boundary fence, and the Line Fences Act sets out a process if they can’t agree. It is best to talk with your neighbour before work starts and confirm where the property line is.

How long does a pressure-treated fence last?

A well-built pressure-treated fence with ground-contact rated posts typically lasts 15 to 20 years or more. Keeping soil and water off the boards and applying a stain or sealer every few years helps it last longer.

Need a new fence or retaining wall in Richmond Hill?

If your yard is sloped, your fence is leaning or soil is moving onto your neighbour’s property, a fence and retaining wall built together can solve both problems. Jacko Contracting builds fences and retaining walls across Richmond Hill and the GTA. See our fence installation service and request a free consultation.

Contemporary home with gable roof, wooden slat façade, and expansive glass windows.

Start Your Construction Project Today

Tell us about your project and we will get back to you with a free, no-obligation estimate. We handle design, permits and construction, so you deal with one insured contractor from start to finish.

Fill out the form for a free consultation, and let us create a tailored solution that brings your vision to life. From safe, code-compliant construction to innovative design, precise planning, and exceptional craftsmanship, every detail is managed with professionalism and care.

Call Now: For Free Estimate

Schedule a Consultation